Energy Efficient Buildings MarketSize, Share & Industry Analysis, 2026-2034By ComponentBy Building TypeBy Construction TypeBy TechnologyBy Insulation MaterialBy Certification and Rating StandardBy Building Performance LevelBy Delivery ModelBy Distribution Channel
Full title & scope — all 9 axes with their segments
Energy Efficient Buildings Market Size, Share & Industry Analysis, By Component (HVAC Systems, Lighting Systems, Building Envelope, Building Energy Management and Controls, Water Heating and Water Efficiency, On-Site Renewable Energy), By Building Type (Residential, Commercial, Industrial, Institutional and Public), By Construction Type (New Construction, Retrofit and Renovation), By Technology (Building Energy Management Systems, IoT-Enabled Smart Building Systems, Heat Pump Technology, LED and Intelligent Lighting, Passive Design Technologies, Energy Storage and Microgrid Integration), By Insulation Material (Mineral Wool, Plastic Foams, Natural and Bio-Based Insulation, Advanced Insulation), By Certification and Rating Standard (LEED, BREEAM, ENERGY STAR, Passive House, Net-Zero and Zero-Energy Building Programmes, National and Regional Energy Codes), By Building Performance Level (Code-Compliant High Efficiency Buildings, Nearly Zero-Energy Buildings, Net-Zero-Energy Buildings, Energy-Positive Buildings), By Delivery Model (Equipment and Product Sales, Energy Performance Contracting, Energy Audit and Consulting Services, Commissioning and Monitoring Services, Energy-as-a-Service), By Distribution Channel (Direct Sales to Developers and Owners, Contractors and Installers, Distributors and Wholesalers, Retail and Online), and Regional Forecast, 2026-2034
Market outlook, key takeaways, drivers and challenges for the report period.

- 01By ComponentHVAC Systems · Lighting Systems · Building Envelope
- 02By Building TypeResidential · Commercial · Industrial
- 03By Construction TypeNew Construction · Retrofit and Renovation
- 04By TechnologyBuilding Energy Management Systems · IoT-Enabled Smart Building Systems · Heat Pump Technology
- 05By Insulation MaterialMineral Wool · Plastic Foams · Natural and Bio-Based Insulation
- 06By Certification and Rating StandardLEED · BREEAM · ENERGY STAR
- 07By Building Performance LevelCode-Compliant High Efficiency Buildings · Nearly Zero-Energy Buildings · Net-Zero-Energy Buildings
- 08By Delivery ModelEquipment and Product Sales · Energy Performance Contracting · Energy Audit and Consulting Services
- 09By Distribution ChannelDirect Sales to Developers and Owners · Contractors and Installers · Distributors and Wholesalers
- 10By Region
Market Analysis & Outlook
Energy efficient buildings are residential, commercial, industrial and institutional structures designed, built or upgraded to use less energy for heating, cooling, lighting, water heating and operation than a code-minimum equivalent. The category covers the equipment, materials, controls and services that deliver that performance, including HVAC systems, high performance lighting, envelope and insulation products, building energy management systems and on-site renewable generation. Buyers are developers, building owners, facility managers, public agencies and the contractors and energy service providers who act for them.
USD 35.6 billion of revenue was recorded in the global energy efficient buildings market in 2025. By 2034 the figure reaches USD 72.8 billion, a compound annual growth rate of 8.33% through the forecast period, along a series that runs USD 24.8 billion in 2020, USD 33 billion in 2024, USD 38.4 billion in 2026 and USD 53 billion in 2030.
30% of 2025 revenue sits in HVAC Systems, worth USD 10.68 billion and rising to USD 21.11 billion at 29% by 2034, the largest component line in both years. Growth is fastest in Building Energy Management and Controls at 12.61% and slowest in Lighting Systems at 3.02%. Share moves toward Building Energy Management and Controls and On-Site Renewable Energy and away from HVAC Systems, Lighting Systems, Building Envelope and Water Heating and Water Efficiency, though no line shrinks in revenue terms.
Cut by building type, the largest line is Commercial: 40% of 2025 revenue, worth USD 14.24 billion, and 39% at USD 28.39 billion by 2034. Institutional and Public grows faster at 10.28% against 7.97%, moving from 11% of revenue to 13% by 2034. Both this axis and the component one divide the same revenue, which is why they are alternative views, not components.
USD 11.39 billion of 2025 revenue is generated in Asia Pacific, 32% of the global total and the largest regional share; it reaches USD 28.54 billion by 2034. Europe is next at 28% and USD 9.97 billion, and Latin America last at 6%. Share shifts toward Asia Pacific over the forecast period, so the regional split repays a close reading.
The 2025 total is triangulated from published sources and category proxies, with no independently sourced count behind it. Segment, regional and country splits are estimated on the same basis, which bounds the precision of the figures above. Coverage runs to five regions, six component lines and nine segmentation axes across a fifteen-year window.
Market Size, 2020–2034
USD BillionRevenue in USD Billion. Values up to 2025 are actuals; 2026–2034 are forecast.
Key Takeaways
- A forecast-period rate of 8.33% takes the market from USD 35.6 billion in 2025 to USD 72.8 billion in 2034, against 7.5% recorded over the 2020-2025 historical period.
- 30% of 2025 revenue sits in HVAC Systems (USD 10.68 billion) and it remains the largest component line in 2034 at USD 21.11 billion and 29%.
- At 12.61%, Building Energy Management and Controls grows faster than any other component line, moving from USD 4.98 billion and 14% of revenue in 2025 to USD 14.56 billion and 20% in 2034.
- Against a base case of USD 72.8 billion in 2034, the study also reports a bear case at USD 58.6 billion and a bull case at USD 81 billion, with the assumptions behind each set out separately.
- Asia Pacific holds 32% of global revenue in 2025 at USD 11.39 billion, the largest of the five regions tracked, and reaches USD 28.54 billion by 2034.
- China accounts for 43.01% of Asia Pacific in the base year, worth USD 4.9 billion in 2025 and reaching USD 12.2 billion by 2034, the worked country example carried through that region's chapters.
- Fifteen years are reported, 2020 to 2034 with 2025 as the base: revenue, share and growth rate per line, per axis and per region, not as a single blended series.
Market Trends
Revenue Share, By component
Base year 2025HVAC Systems leads with 30.0% of component segment revenue.
Share of component segment revenue, most recent base year.
Read across the forecast period, the global energy efficient buildings market shows movement in three places: component composition, regional weight, and the 8.33% rate applied to the whole.
None of them reverses the market's direction. Every line and every region grows in absolute terms across the period; the movement is in which of them captures the revenue added.
The component mix tilts toward Building Energy Management and Controls. Between 2026 and 2034, 12.61% growth in Building Energy Management and Controls against 3.02% in Lighting Systems pulls the component mix apart. Building Energy Management and Controls takes its share of revenue from 14% to 20% while Lighting Systems gives up ground, from 14% to 9%. Revenue rises on both sides; USD 4.98 billion to USD 14.56 billion and USD 4.98 billion to USD 6.55 billion respectively, so this is a change in composition, not a contraction, and one forecast window is long enough for it to matter.
Asia Pacific gain regional share. Asia Pacific moves from 32% of revenue in 2025 to 39.2% in 2034, worth USD 11.39 billion rising to USD 28.54 billion. The offsetting side is North America at 27% moving to 23.4%, Europe at 28% moving to 24.4%, Latin America at 6% moving to 6%, Middle East and Africa at 7% moving to 7%, none of which contracts. That makes the regional split worth reading directly instead of scaling from the global rate: the same market rate produces different outcomes depending on where a supplier's revenue sits.
The series never breaks trajectory. Reading the series: USD 24.8 billion in 2020, USD 33 billion in 2024, USD 35.6 billion in 2025, USD 38.4 billion in 2026, USD 53 billion in 2030 and USD 72.8 billion in 2034. Against 7.5% through the historical period, the 8.33% forecast rate is a continuation; no year in the series interrupts it. For a participant that makes planning a question of capturing a share of steady expansion instead of timing a discontinuity, and it is why the component and regional mixes matter more to a forecast than the headline rate does.
Market Growth Factors
Building Energy Management and Controls carries the market's growth rate
Market Drivers
3- 01Building Energy Management and Controls carries the market's growth rate
Building Energy Management and Controls compounds at 12.61% against 8.33% for the market, rising from USD 4.98 billion in 2025 to USD 14.56 billion in 2034 and from 14% of revenue to 20%. Nothing else on the axis grows as fast (Lighting Systems manages 3.02%) so the blended 8.33% is carried by this one line instead of shared across them. Where a supplier sits on this axis therefore decides whether it grows with the market or below it.
- 02The two largest regions hold most of the base
32% of 2025 revenue (USD 11.39 billion) is generated in Asia Pacific, reaching USD 28.54 billion by 2034, with share rising to 39.2%. Behind it, Europe holds 28%; USD 9.97 billion rising to USD 17.76 billion. Together the two account for the majority of both the 2025 base and the revenue added by 2034, which is why a regional plan treating all five regions at equal weight misreads where the growth actually lands.
- 03The base has grown every year since 2020
USD 24.8 billion in 2020, USD 33 billion in 2024 and USD 35.6 billion in 2025: 7.5% compound growth before the forecast period even begins. The forecast continues at 8.33% to USD 72.8 billion in 2034. Fifteen years of unbroken growth in the series means the forecast rests on a demonstrated trajectory, not a projected turnaround, and it is why the 8.33% rate is applied flat across the whole period instead of ramped through it.
Growth drivers
| # | Growth driver | Impact | Gross contribution (Billion) | 2026-28 | 2029-31 | 2032-34 |
|---|---|---|---|---|---|---|
| 1 | Tightening building energy codes and net-zero mandates | High | +11.5 | High | High | Medium |
| 2 | Retrofit programmes and public funding | High | +9 | High | High | Medium |
| 3 | Heat pump adoption and heating electrification | Medium-High | +7.2 | Medium | High | High |
| 4 | Smart controls and IoT adoption | Medium-High | +6.3 | Medium | High | High |
| 5 | Energy costs and corporate decarbonisation targets | Medium | +4.8 | Medium | Medium | Medium |
| 6 | Others | Low | +3.2 | Low | Low | Low |
| Total | +42 | |||||
Restraints
| # | Restraint | Impact | Estimated reduction (Billion) | 2026-28 | 2029-31 | 2032-34 |
|---|---|---|---|---|---|---|
| 1 | High upfront capital cost and uncertain payback | High | −3 | High | Medium | Medium |
| 2 | Installer and skilled labour shortages | Medium | −1.3 | Medium | Medium | Low |
| 3 | Higher interest rates and construction cycle weakness | Medium | −0.5 | Medium | Low | Low |
| Total | −4.8 | |||||
Drivers contribute 42 Billion and restraints remove 4.8 Billion, a net 37.2 Billion, which is the revenue the market adds between the base year and 2034. Contributions are CDI estimates, apportioned so that they reconcile with the forecast rather than being read from it.
Growth in the global energy efficient buildings market comes from three measurable sources over 2026-2034: the market's own compounding at 8.33%, the share gained by faster-growing component lines, and expansion in the regions taking a larger part of global revenue.
Restraining Factors
The bear case and what drives it
Market Restraints
2- 01The bear case and what drives it
The study's downside path assumes interest rates stay high and construction activity remains weak, retrofit funding is delayed or reduced, installer shortages slow heat pump rollout, and code enforcement is relaxed in several large markets, and ends 2034 at USD 58.6 billion against the USD 72.8 billion base case, the same USD 35.6 billion base year, a slower forecast period.
- 02HVAC Systems holds the blended rate down
HVAC Systems carries 30% of 2025 revenue at USD 10.68 billion but compounds at 7.91% against 8.33% for the market, taking its share to 29% by 2034 even as revenue rises to USD 21.11 billion. Because it carries that much of the base, its pace holds the blended rate down more than any faster line lifts it.
Market Opportunities
Where the forecast could be beaten
Market Opportunities
2- 01Where the forecast could be beaten
Mandated performance standards are enforced on schedule, public retrofit funding is fully deployed, borrowing costs ease, and heat pump and controls prices fall faster than the base case assumes. On that assumption the market reaches USD 81 billion by 2034 against USD 72.8 billion in the base case, from the same USD 35.6 billion in 2025.
- 02Building Energy Management and Controls share moves from 14% to 20%
Share on the component axis moves toward Building Energy Management and Controls, from 14% in 2025 to 20% in 2034, on 12.61% growth against the market's 8.33% and revenue rising from USD 4.98 billion to USD 14.56 billion. Taking position there does not require displacing whoever holds HVAC Systems, which is the harder and more expensive fight.
Market Challenges
One component line carries the market
Market Challenges
2- 01One component line carries the market
USD 10.68 billion of 2025 revenue sits in HVAC Systems, 30% of the total, and it is still 29% at USD 21.11 billion nine years later. Anything that changes demand for it changes the headline number; nothing else on the axis carries that weight.
- 02Single-country exposure in Asia Pacific
Asia Pacific is worth USD 11.39 billion in 2025 and USD 4.9 billion of that is China; 43.01% of the region, reaching USD 12.2 billion in 2034. A regional number that depends this heavily on one country carries that country's specific conditions inside it, which a reader treating the region as diversified would miss.
Segmentation Analysis
9 axesThe global energy efficient buildings market is cut nine ways: by component, building type, construction type, technology, insulation material, certification and rating standard, building performance level, delivery model and distribution channel. Every one of them divides the same revenue, which makes them views of one market from different commercial angles, not components of it.
There are six lines on the component axis, and all of them grow in revenue between 2025 and 2034. What separates them is share: two gain it, the rest give it up.
By Component · 6 segments
Building Energy Management and Controls Outpaces the Axis While HVAC Systems Holds the Largest Share
- Largest HVAC Systems · 30%
- Fastest Building Energy Management and Controls · 12.6%
- Moves most Building Energy Management and Controls · +6 pts
- Order by 2034 changes
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| HVAC Systems | $10.68B | 30% | $21.11B | 29%-1 | 7.9% |
| Lighting Systems | $4.98B | 14% | $6.55B | 9%-5 | 3% |
| Building Envelope | $7.83B | 22% | $13.10B | 18%-4 | 5.9% |
| Building Energy Management and Controls | $4.98B | 14% | $14.56B | 20%+6 | 12.6% |
| Water Heating and Water Efficiency | $2.85B | 8% | $5.82B | 8% | 8.3% |
| On-Site Renewable Energy | $4.27B | 12% | $11.65B | 16%+4 | 11.8% |
Heating and cooling equipment leads because it is the largest energy load in any building and the item most often replaced under code or retrofit programmes. Building energy management and controls grow fastest, as owners add sensing and automation to existing systems to capture savings without major construction, and as codes extend metering and control requirements to more building types. HVAC Systems remains the largest line through 2034, so the axis changes in proportion, not in order. This is the axis the estimation prices in full, year by year, and the one the regional chapters cut against.
By Building Type · 4 segments
Commercial Led by Building type in 2025, with Institutional and Public Growing Fastest
- Largest Commercial · 40%
- Fastest Institutional and Public · 10.3%
- Moves most Institutional and Public · +2 pts
- Order by 2034 unchanged
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Residential | $12.10B | 34% | $24.02B | 33%-1 | 7.9% |
| Commercial | $14.24B | 40% | $28.39B | 39%-1 | 8% |
| Industrial | $5.34B | 15% | $10.92B | 15% | 8.3% |
| Institutional and Public | $3.92B | 11% | $9.46B | 13%+2 | 10.3% |
Commercial buildings lead because offices, retail and hospitality carry large, continuously operated energy loads and owners with clear cost and reporting incentives. Institutional and public buildings grow fastest, helped by public procurement rules and dedicated retrofit funding for schools, hospitals and government estates that private owners do not receive. By 2034 Commercial is still ahead, making this a shift in weight, not a change of leader.
By Construction Type · 2 segments
New Construction Held the Dominant Share of the Construction type Segment in 2025
- Largest New Construction · 55%
- Fastest Retrofit and Renovation · 10%
- Moves most New Construction · -7 pts
- Order by 2034 changes
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| New Construction | $19.58B | 55% | $34.94B | 48%-7 | 6.6% |
| Retrofit and Renovation | $16.02B | 45% | $37.86B | 52%+7 | 10% |
New construction leads because every new building must meet current energy codes and efficiency measures are cheapest to install at the design stage. Retrofit and renovation grows faster as the existing building stock is far larger than annual additions, and renovation mandates and funding programmes are moving owners from voluntary upgrades to required ones. Retrofit and Renovation grows fastest here, so its share rises while New Construction gives ground. By 2034 the largest line is Retrofit and Renovation and no longer New Construction, the one axis here where the order actually changes.
By Technology · 6 segments
Scale in Heat Pump Technology and Growth in IoT-Enabled Smart Building Systems Define the Technology Axis
- Largest Heat Pump Technology · 22%
- Fastest IoT-Enabled Smart Building Systems · 11.8%
- Moves most LED and Intelligent Lighting · -8 pts
- Order by 2034 changes
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Building Energy Management Systems | $7.12B | 20% | $13.83B | 19%-1 | 7.7% |
| IoT-Enabled Smart Building Systems | $5.34B | 15% | $14.56B | 20%+5 | 11.8% |
| Heat Pump Technology | $7.83B | 22% | $18.20B | 25%+3 | 9.8% |
| LED and Intelligent Lighting | $6.41B | 18% | $7.28B | 10%-8 | 1.4% |
| Passive Design Technologies | $5.34B | 15% | $9.46B | 13%-2 | 6.6% |
| Energy Storage and Microgrid Integration | $3.56B | 10% | $9.46B | 13%+3 | 11.5% |
Heat pump technology leads among the enabling technologies because it replaces fossil fuel heating and is now written into many national decarbonisation plans. IoT-enabled smart building systems grow fastest, as lower sensor and connectivity costs let owners add analytics and automated optimisation to buildings that already have basic controls in place. By 2034 Heat Pump Technology is still ahead, making this a shift in weight, not a change of leader.
By Insulation Material · 4 segments
Scale in Plastic Foams and Growth in Natural and Bio-Based Insulation Define the Insulation material Axis
- Largest Plastic Foams · 40%
- Fastest Natural and Bio-Based Insulation · 14.3%
- Moves most Natural and Bio-Based Insulation · +5 pts
- Order by 2034 unchanged
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Mineral Wool | $13.53B | 38% | $25.48B | 35%-3 | 7.3% |
| Plastic Foams | $14.24B | 40% | $26.21B | 36%-4 | 7% |
| Natural and Bio-Based Insulation | $2.85B | 8% | $9.46B | 13%+5 | 14.3% |
| Advanced Insulation | $4.98B | 14% | $11.65B | 16%+2 | 9.9% |
Plastic foams lead because their high thermal performance per unit thickness suits space-constrained walls and roofs in both new and retrofit work. Natural and bio-based insulation grows fastest from a small base, as embodied carbon rules and green building certification credits push specifiers toward lower-carbon materials. By 2034 Plastic Foams is still ahead, making this a shift in weight, not a change of leader.
By Certification and Rating Standard · 6 segments
Net-Zero and Zero-Energy Building Programmes Outpaces the Axis While LEED Holds the Largest Share
- Largest LEED · 25%
- Fastest Net-Zero and Zero-Energy Building Programmes · 14.8%
- Moves most Net-Zero and Zero-Energy Building Programmes · +7 pts
- Order by 2034 changes
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| LEED | $8.90B | 25% | $16.02B | 22%-3 | 6.8% |
| BREEAM | $5.34B | 15% | $9.46B | 13%-2 | 6.6% |
| ENERGY STAR | $6.41B | 18% | $10.19B | 14%-4 | 5.3% |
| Passive House | $2.49B | 7% | $6.55B | 9%+2 | 11.3% |
| Net-Zero and Zero-Energy Building Programmes | $3.56B | 10% | $12.38B | 17%+7 | 14.8% |
| National and Regional Energy Codes | $8.90B | 25% | $18.20B | 25% | 8.3% |
National and regional energy codes and LEED lead because codes apply to every building in a jurisdiction and LEED is the most widely recognised voluntary rating for commercial projects. Net-zero and zero-energy programmes grow fastest as governments and large owners set carbon targets that require performance beyond what ordinary codes demand. Leadership changes hands: National and Regional Energy Codes is the largest line by 2034, not LEED.
By Building Performance Level · 4 segments
Energy-Positive Buildings Outpaces the Axis While Code-Compliant High Efficiency Buildings Holds the Largest Share
- Largest Code-Compliant High Efficiency Buildings · 55%
- Fastest Energy-Positive Buildings · 16.9%
- Moves most Code-Compliant High Efficiency Buildings · -17 pts
- Order by 2034 unchanged
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Code-Compliant High Efficiency Buildings | $19.58B | 55% | $27.66B | 38%-17 | 3.9% |
| Nearly Zero-Energy Buildings | $10.68B | 30% | $26.21B | 36%+6 | 10.5% |
| Net-Zero-Energy Buildings | $4.27B | 12% | $14.56B | 20%+8 | 14.6% |
| Energy-Positive Buildings | $1.07B | 3% | $4.37B | 6%+3 | 16.9% |
Code-compliant high efficiency buildings lead because they cover the bulk of current construction and the large stock of upgraded existing buildings. Energy-positive buildings grow fastest from a very small base, as on-site generation and storage costs fall and early public and corporate projects demonstrate that buildings can export energy. By 2034 Code-Compliant High Efficiency Buildings is still ahead, making this a shift in weight, not a change of leader.
By Delivery Model · 5 segments
Equipment and Product Sales Held the Dominant Share of the Delivery model Segment in 2025
- Largest Equipment and Product Sales · 62%
- Fastest Energy-as-a-Service · 13.3%
- Moves most Equipment and Product Sales · -10 pts
- Order by 2034 changes
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Equipment and Product Sales | $22.07B | 62% | $37.86B | 52%-10 | 6.2% |
| Energy Performance Contracting | $4.27B | 12% | $11.65B | 16%+4 | 11.8% |
| Energy Audit and Consulting Services | $2.85B | 8% | $5.82B | 8% | 8.3% |
| Commissioning and Monitoring Services | $3.56B | 10% | $8.74B | 12%+2 | 10.5% |
| Energy-as-a-Service | $2.85B | 8% | $8.74B | 12%+4 | 13.3% |
Equipment and product sales lead because most spending still takes the form of purchased hardware and materials installed through ordinary construction contracts. Energy-as-a-service grows fastest, as owners with limited capital prefer to pay for delivered savings or comfort rather than fund equipment, and financiers become more willing to back performance-linked contracts. By 2034 Equipment and Product Sales is still ahead, making this a shift in weight, not a change of leader.
By Distribution Channel · 4 segments
Retail and Online Outpaces the Axis While Direct Sales to Developers and Owners Holds the Largest Share
- Largest Direct Sales to Developers and Owners · 40%
- Fastest Retail and Online · 13.3%
- Moves most Retail and Online · +4 pts
- Order by 2034 unchanged
| Segment | 2025 | Share | 2034 | Share | CAGR |
|---|---|---|---|---|---|
| Direct Sales to Developers and Owners | $14.24B | 40% | $27.66B | 38%-2 | 7.7% |
| Contractors and Installers | $12.46B | 35% | $24.75B | 34%-1 | 7.9% |
| Distributors and Wholesalers | $6.05B | 17% | $11.65B | 16%-1 | 7.5% |
| Retail and Online | $2.85B | 8% | $8.74B | 12%+4 | 13.3% |
Direct sales to developers and owners lead because large projects are specified and procured under negotiated supply contracts. Retail and online grows fastest from a small base, as smaller owners and homeowners buy lighting, controls, smart thermostats and insulation products themselves, and as digital ordering reaches installer-grade products. The order does not change: Direct Sales to Developers and Owners is still largest in 2034, and what moves is how much it holds.
Regional Insights
Regional Revenue Share
Base year 2025
Share of global revenue in the base year.
Only the leading region's share is published outside the report; pins mark the region, not a specific country.
North America Market Analysis
The 3rd-largest region covered — 3.6 points of share move elsewhere by 2034, while revenue still grows 1.8×.
- Rank 3 of 5
- 2025 share 27%
- By 2034 23.4%
- Revenue $9.61B → $17.04B
North America holds 27% of the global energy efficient buildings market in 2025, worth USD 9.61 billion rising to USD 17.04 billion in 2034. Among the five regions it ranks third by revenue in both years.
23.4% of global revenue sits here in 2034, below the 2025 level, and the region keeps growing in absolute terms while others expand faster, a change in relative weight, not a decline in demand.
Within the region the component split tracks the global one; 30% of 2025 revenue in HVAC Systems, fastest growth of 12.61% in Building Energy Management and Controls. The full report breaks North America out along every axis and by country.
United States
Sets the pace for North America at 84.3% of it, growing 1.8×.
- In region 1 of 2
- Of region 84.3%
- Of global 22.8%
- Revenue $8.10B → $14.30B
The United States is the largest market within North America, generating USD 8.1 billion in 2025 and projected to reach USD 14.3 billion by 2034. 84.27% of the region in 2025 means the regional figures are, in practice, a view of this market with others attached. Set against USD 9.61 billion and USD 17.04 billion for the region, it is why this market, and not a smaller one, is the one reported in full.
Demand in the United States follows the component mix reported at global level: HVAC Systems is the largest line at 30% of 2025 revenue, moving to 29% by 2034, while Building Energy Management and Controls grows fastest at 12.61% and takes its share from 14% to 20%. Since 84.27% of North America's revenue is generated here, the regional numbers inherit this market's mix instead of smoothing it out. Revenue by component for the United States is reported separately in the full report.
Energy efficient buildings in the United States are governed mainly by state and local building codes, which adopt model energy codes published by the International Code Council and by ASHRAE, so there is no single national regulator. The Department of Energy sets national energy conservation standards for appliances and equipment and supports code development, while the Environmental Protection Agency runs the ENERGY STAR labelling programme. A supplier of building products must show conformity with the referenced test standards, obtain third-party listing where a code requires it, and meet the equipment efficiency and labelling rules. Projects often add voluntary green certification such as LEED, which developers use to document performance.
Johnson Controls International plc, Siemens AG, Schneider Electric SE, Honeywell International Inc., Carrier Global Corporation, Daikin Industries, Ltd., Trane Technologies plc, Saint-Gobain S.A., Kingspan Group plc, Rockwool A/S, Owens Corning, Signify N.V., ABB Ltd., Lennox International Inc., Mitsubishi Electric Corporation, Cree LED (Penguin Group), Acuity Brands, Inc., Legrand S.A., Assa Abloy AB, Andersen Corporation, Pilkington (NSG Group), AGC Inc., Dow Inc., BASF SE, Covestro AG, Huntsman Corporation, Knauf Gips KG, Paroc Group Oy, Fletcher Building Limited, Azbil Corporation, Bosch Thermotechnology (Robert Bosch GmbH) and Viessmann Climate Solutions SE are the suppliers covered in the United States. The commercially relevant division is 30% of 2025 revenue in HVAC Systems, where the volume is, against 12.61% growth in Building Energy Management and Controls, where share moves. Country-level shares and positioning per company sit in the full report.
Canada
2nd-largest in North America, growing 1.9×.
- In region 2 of 2
- Of region 12.5%
- Of global 3.4%
- Revenue $1.20B → $2.25B
3.37% of global revenue is generated in Canada; USD 1.2 billion in 2025, reaching USD 2.25 billion in 2034, and 12.48% of North America.
Europe Market Analysis
The 2nd-largest region covered — 3.6 points of share move elsewhere by 2034, while revenue still grows 1.8×.
- Rank 2 of 5
- 2025 share 28%
- By 2034 24.4%
- Revenue $9.97B → $17.76B
USD 9.97 billion of 2025 revenue is generated in Europe, 28% of the global energy efficient buildings market rising to USD 17.76 billion in 2034. It is a leading region on this axis, second by revenue throughout the period.
24.4% of global revenue sits here in 2034, below the 2025 level, and the region keeps growing in absolute terms while others expand faster, a change in relative weight, not a decline in demand.
Within the region the component split tracks the global one; 30% of 2025 revenue in HVAC Systems, fastest growth of 12.61% in Building Energy Management and Controls. The full report breaks Europe out along every axis and by country.
Germany
The largest market in Europe, growing 1.8×.
- In region 1 of 3
- Of region 23.1%
- Of global 6.5%
- Revenue $2.30B → $4.05B
USD 2.3 billion of Europe's 2025 revenue is generated in Germany, the region's largest market, reaching USD 4.05 billion by 2034. It accounts for 23.07% of regional revenue in the base year, the largest single share without dominating the region outright. The region itself runs USD 9.97 billion to USD 17.76 billion over the same period, and this is the market carrying the country-level detail in the full report.
The component pattern in Germany is the global one: 30% of 2025 revenue in HVAC Systems, 29% by 2034, against 12.61% growth in Building Energy Management and Controls taking it from 14% to 20%. Because the country carries 23.07% of Europe, a movement in its own mix shows up in the regional totals instead of being averaged away by neighbouring markets. Revenue by component for Germany is reported separately in the full report.
Germany regulates building energy performance through the Gebäudeenergiegesetz, the Building Energy Act, which sets requirements for new and renovated buildings and for heating and cooling systems. Federal ministries for economic affairs and for housing oversee it, and the federal states enforce it locally. Building products sold in the country must carry the CE marking under the EU Construction Products Regulation, backed by harmonised European standards and declarations of performance. An energy performance certificate is required when a building is built, sold or let. Suppliers of insulation, glazing and technical equipment also follow the EU Ecodesign and energy labelling rules for the relevant product groups.
Competition in Germany runs between the suppliers this study tracks: Johnson Controls International plc, Siemens AG, Schneider Electric SE, Honeywell International Inc., Carrier Global Corporation, Daikin Industries, Ltd., Trane Technologies plc, Saint-Gobain S.A., Kingspan Group plc, Rockwool A/S, Owens Corning, Signify N.V., ABB Ltd., Lennox International Inc., Mitsubishi Electric Corporation, Cree LED (Penguin Group), Acuity Brands, Inc., Legrand S.A., Assa Abloy AB, Andersen Corporation, Pilkington (NSG Group), AGC Inc., Dow Inc., BASF SE, Covestro AG, Huntsman Corporation, Knauf Gips KG, Paroc Group Oy, Fletcher Building Limited, Azbil Corporation, Bosch Thermotechnology (Robert Bosch GmbH) and Viessmann Climate Solutions SE. Two different problems sit on the same axis: holding HVAC Systems at 30% of 2025 revenue, and taking Building Energy Management and Controls while it grows at 12.61%. The commercial size of that position is USD 9.97 billion in 2025, moving to USD 17.76 billion by 2034 across the forecast period.
United Kingdom
2nd-largest in Europe, growing 1.8×.
- In region 2 of 3
- Of region 17.6%
- Of global 4.9%
- Revenue $1.75B → $3.20B
4.92% of global revenue is generated in the United Kingdom; USD 1.75 billion in 2025, reaching USD 3.2 billion in 2034, and 17.56% of Europe.
France
3rd-largest in Europe, growing 1.8×.
- In region 3 of 3
- Of region 16.1%
- Of global 4.5%
- Revenue $1.60B → $2.90B
France is sized at USD 1.6 billion in 2025, rising to USD 2.9 billion by 2034; 4.49% of global revenue and 16.05% of Europe. It is reported separately from Germany across every segmentation axis in the full report.
Asia Pacific Market Analysis
The largest region covered, and the one gaining the most — it picks up 7.2 points of share by 2034, while revenue still grows 2.5×.
- Rank 1 of 5
- 2025 share 32%
- By 2034 39.2%
- Revenue $11.39B → $28.54B
Asia Pacific holds 32% of the global energy efficient buildings market in 2025, worth USD 11.39 billion with USD 28.54 billion projected for 2034. Among the five regions it ranks first by revenue in both years.
By 2034 the share has moved up to 39.2%, at a pace above the 8.33% global rate, so this region warrants separate treatment and should not be scaled off the total.
Within the region the component split tracks the global one; 30% of 2025 revenue in HVAC Systems, fastest growth of 12.61% in Building Energy Management and Controls. Revenue for Asia Pacific is broken out by every segmentation axis and by country in the full report.
China
The largest market in Asia Pacific, growing 2.5×.
- In region 1 of 3
- Of region 43%
- Of global 13.8%
- Revenue $4.90B → $12.20B
The largest single market in Asia Pacific is China, at USD 4.9 billion in 2025 and USD 12.2 billion in 2034. At 43.01% of the region in 2025 it leads, but a majority of Asia Pacific's revenue is generated in other markets. The region itself runs USD 11.39 billion to USD 28.54 billion over the same period, and this is the market carrying the country-level detail in the full report.
The component pattern in China is the global one: 30% of 2025 revenue in HVAC Systems, 29% by 2034, against 12.61% growth in Building Energy Management and Controls taking it from 14% to 20%. With 43.01% of Asia Pacific concentrated here, a change in this country's mix is visible in the regional figures instead of being diluted by its neighbours. China carries its own component breakdown in the full report.
China governs energy efficient buildings through the Ministry of Housing and Urban-Rural Development, which issues national standards for green buildings and for design energy conservation across climate zones. These sit alongside the Energy Conservation Law, and local housing authorities enforce compliance during design review and completion inspection. Building materials and equipment must conform to mandatory national standards, and many product categories fall under the China Compulsory Certification system administered by the market regulator. Energy efficiency labelling applies to listed equipment such as air conditioners. Developers seeking recognition can pursue the national green building evaluation label, which assesses design and operation.
In China the field is Johnson Controls International plc, Siemens AG, Schneider Electric SE, Honeywell International Inc., Carrier Global Corporation, Daikin Industries, Ltd., Trane Technologies plc, Saint-Gobain S.A., Kingspan Group plc, Rockwool A/S, Owens Corning, Signify N.V., ABB Ltd., Lennox International Inc., Mitsubishi Electric Corporation, Cree LED (Penguin Group), Acuity Brands, Inc., Legrand S.A., Assa Abloy AB, Andersen Corporation, Pilkington (NSG Group), AGC Inc., Dow Inc., BASF SE, Covestro AG, Huntsman Corporation, Knauf Gips KG, Paroc Group Oy, Fletcher Building Limited, Azbil Corporation, Bosch Thermotechnology (Robert Bosch GmbH) and Viessmann Climate Solutions SE. The commercially relevant division is 30% of 2025 revenue in HVAC Systems, where the volume is, against 12.61% growth in Building Energy Management and Controls, where share moves. The commercial size of that position is USD 11.39 billion in 2025 and USD 28.54 billion by 2034, 32% of the global total in the base year.
Japan
2nd-largest in Asia Pacific, growing 1.8×.
- In region 2 of 3
- Of region 17.1%
- Of global 5.5%
- Revenue $1.95B → $3.50B
Japan is sized at USD 1.95 billion in 2025, rising to USD 3.5 billion by 2034; 5.48% of global revenue and 17.12% of Asia Pacific. It is reported separately from China across every segmentation axis in the full report.
India
3rd-largest in Asia Pacific, growing 3.7×.
- In region 3 of 3
- Of region 10.5%
- Of global 3.4%
- Revenue $1.20B → $4.40B
India is sized at USD 1.2 billion in 2025, rising to USD 4.4 billion by 2034; 3.37% of global revenue and 10.53% of Asia Pacific. It is reported separately from China across every segmentation axis in the full report.
Latin America Market Analysis
The 5th-largest region covered, holding its share flat through 2034, while revenue still grows 2.0×.
- Rank 5 of 5
- 2025 share 6%
- By 2034 6%
- Revenue $2.14B → $4.37B
USD 2.14 billion of 2025 revenue is generated in Latin America, 6% of the global energy efficient buildings market with USD 4.37 billion projected for 2034. That makes it the fifth-largest region covered, in 2025 and again in 2034.
6% of global revenue sits here in 2034, below the 2025 level, a shift in share, not in direction: revenue climbs every year while the market's centre of gravity moves elsewhere.
Within the region the component split tracks the global one; 30% of 2025 revenue in HVAC Systems, fastest growth of 12.61% in Building Energy Management and Controls. Latin America is reported axis by axis and country by country in the full study.
Brazil
The largest market in Latin America, growing 2.1×.
- In region 1 of 2
- Of region 39.8%
- Of global 2.4%
- Revenue $0.85B → $1.75B
The largest single market in Latin America is Brazil, at USD 0.85 billion in 2025 and USD 1.75 billion in 2034. It accounts for 39.79% of regional revenue in the base year, the largest single share without dominating the region outright. Against regional totals of USD 2.14 billion in 2025 and USD 4.37 billion in 2034, it is the country the full report breaks out in detail.
Brazil buys along the same lines as the market globally; HVAC Systems first at 30% of 2025 revenue and 29% in 2034, Building Energy Management and Controls fastest at 12.61% on a share moving from 14% to 20%. With 39.79% of Latin America concentrated here, a change in this country's mix is visible in the regional figures instead of being diluted by its neighbours. The full report reports Brazil by component separately.
Brazil has no single national building energy code covering all types of buildings, and the regime combines federal labelling with technical standards. The national energy conservation programme, PROCEL, and the metrology institute INMETRO operate the building energy labelling scheme for commercial, public and residential buildings. The Brazilian Association of Technical Standards, ABNT, publishes the performance standards that cover thermal comfort and building envelopes. Equipment such as air conditioners and lighting carries mandatory INMETRO efficiency labelling. Municipal authorities apply local building codes and issue permits, so a supplier must show conformity to the relevant ABNT standards and obtain the product certification that applies.
The suppliers tracked in this study (Johnson Controls International plc, Siemens AG, Schneider Electric SE, Honeywell International Inc., Carrier Global Corporation, Daikin Industries, Ltd., Trane Technologies plc, Saint-Gobain S.A., Kingspan Group plc, Rockwool A/S, Owens Corning, Signify N.V., ABB Ltd., Lennox International Inc., Mitsubishi Electric Corporation, Cree LED (Penguin Group), Acuity Brands, Inc., Legrand S.A., Assa Abloy AB, Andersen Corporation, Pilkington (NSG Group), AGC Inc., Dow Inc., BASF SE, Covestro AG, Huntsman Corporation, Knauf Gips KG, Paroc Group Oy, Fletcher Building Limited, Azbil Corporation, Bosch Thermotechnology (Robert Bosch GmbH) and Viessmann Climate Solutions SE) compete in Brazil across the component lines above. HVAC Systems, at 30% of 2025 revenue, is where the volume sits, and Building Energy Management and Controls, growing at 12.61%, is where position changes hands over the forecast period. A supplier weighted toward Latin America is competing over a base of USD 2.14 billion in 2025, reaching USD 4.37 billion by 2034 on the trajectory this study models.
Mexico
2nd-largest in Latin America, growing 2.1×.
- In region 2 of 2
- Of region 25.8%
- Of global 1.5%
- Revenue $0.55B → $1.15B
Mexico is sized at USD 0.55 billion in 2025, rising to USD 1.15 billion by 2034; 1.54% of global revenue and 25.75% of Latin America. It is reported separately from Brazil across every segmentation axis in the full report.
Middle East and Africa Market Analysis
The 4th-largest region covered, holding its share flat through 2034, while revenue still grows 2.0×.
- Rank 4 of 5
- 2025 share 7%
- By 2034 7%
- Revenue $2.49B → $5.10B
In Middle East and Africa, 7% of global revenue puts 2025 at USD 2.49 billion rising to USD 5.1 billion in 2034. It is a marginal region on this axis, fourth by revenue throughout the period.
7% of global revenue sits here in 2034, below the 2025 level, a shift in share, not in direction: revenue climbs every year while the market's centre of gravity moves elsewhere.
Segment composition follows the global pattern: HVAC Systems largest at 30% of 2025 revenue, Building Energy Management and Controls fastest at 12.61%. Middle East and Africa is reported axis by axis and country by country in the full study.
Saudi Arabia
The largest market in Middle East and Africa, growing 2.3×.
- In region 1 of 3
- Of region 26.1%
- Of global 1.8%
- Revenue $0.65B → $1.50B
26.08% of Middle East and Africa's base-year revenue comes from Saudi Arabia; USD 0.65 billion, rising to USD 1.5 billion by 2034. 26.08% of the region in the base year makes it the largest market here without making it the region. Set against USD 2.49 billion and USD 5.1 billion for the region, it is why this market, and not a smaller one, is the one reported in full.
Demand in Saudi Arabia follows the component mix reported at global level: HVAC Systems is the largest line at 30% of 2025 revenue, moving to 29% by 2034, while Building Energy Management and Controls grows fastest at 12.61% and takes its share from 14% to 20%. With 26.08% of Middle East and Africa concentrated here, a change in this country's mix is visible in the regional figures instead of being diluted by its neighbours. The full report reports Saudi Arabia by component separately.
In Saudi Arabia, building energy performance is regulated through the Saudi Building Code, administered by the Saudi Building Code National Committee, which includes an energy conservation code for residential and commercial buildings. The Saudi Energy Efficiency Center coordinates national efficiency policy and runs programmes on appliances and building envelopes. The Saudi Standards, Metrology and Quality Organization sets product standards and efficiency labelling requirements for equipment such as air conditioners. Imported building materials and equipment generally need conformity certification before clearance, and municipalities check compliance when issuing building permits. Suppliers must therefore show that products meet the applicable Saudi technical regulations and the code's thermal requirements.
In Saudi Arabia the field is Johnson Controls International plc, Siemens AG, Schneider Electric SE, Honeywell International Inc., Carrier Global Corporation, Daikin Industries, Ltd., Trane Technologies plc, Saint-Gobain S.A., Kingspan Group plc, Rockwool A/S, Owens Corning, Signify N.V., ABB Ltd., Lennox International Inc., Mitsubishi Electric Corporation, Cree LED (Penguin Group), Acuity Brands, Inc., Legrand S.A., Assa Abloy AB, Andersen Corporation, Pilkington (NSG Group), AGC Inc., Dow Inc., BASF SE, Covestro AG, Huntsman Corporation, Knauf Gips KG, Paroc Group Oy, Fletcher Building Limited, Azbil Corporation, Bosch Thermotechnology (Robert Bosch GmbH) and Viessmann Climate Solutions SE. Two different problems sit on the same axis: holding HVAC Systems at 30% of 2025 revenue, and taking Building Energy Management and Controls while it grows at 12.61%. A supplier weighted toward Middle East and Africa is competing over a base of USD 2.49 billion in 2025, reaching USD 5.1 billion by 2034 on the trajectory this study models.
United Arab Emirates
2nd-largest in Middle East and Africa, growing 2.1×.
- In region 2 of 3
- Of region 20.1%
- Of global 1.4%
- Revenue $0.50B → $1.05B
1.4% of global revenue is generated in the United Arab Emirates; USD 0.5 billion in 2025, reaching USD 1.05 billion in 2034, and 20.06% of Middle East and Africa.
South Africa
3rd-largest in Middle East and Africa, growing 2.1×.
- In region 3 of 3
- Of region 12%
- Of global 0.8%
- Revenue $0.30B → $0.62B
Within Middle East and Africa, South Africa accounts for 12.04% of regional revenue and 0.84% of the global total, worth USD 0.3 billion in 2025 and USD 0.62 billion by 2034.
Download a free sample to see the full data tables and segment-level detail behind this analysis.
Report Coverage
This report assesses the market across every segment, with revenue and a growth rate for each line in each year of the study period. It covers the drivers, trends, opportunities, restraints and challenges shaping growth, the competitive landscape and the companies profiled, and the research methodology behind every estimate. Segmentation is reported by component, building type, construction type, technology, insulation material, certification and rating standard, building performance level, delivery model, distribution channel, and regional analysis covers North America, Europe, Asia Pacific, Latin America, Middle East and Africa, each broken out by country.
Competitive Landscape
Scale in HVAC Systems and Growth in Building Energy Management and Controls Set the Terms of Competition
Suppliers in scope: Johnson Controls International plc, Siemens AG, Schneider Electric SE, Honeywell International Inc., Carrier Global Corporation, Daikin Industries, Ltd., Trane Technologies plc, Saint-Gobain S.A., Kingspan Group plc, Rockwool A/S, Owens Corning, Signify N.V., ABB Ltd., Lennox International Inc., Mitsubishi Electric Corporation, Cree LED (Penguin Group), Acuity Brands, Inc., Legrand S.A., Assa Abloy AB, Andersen Corporation, Pilkington (NSG Group), AGC Inc., Dow Inc., BASF SE, Covestro AG, Huntsman Corporation, Knauf Gips KG, Paroc Group Oy, Fletcher Building Limited, Azbil Corporation, Bosch Thermotechnology (Robert Bosch GmbH) and Viessmann Climate Solutions SE.
The component axis, not the regional one, is where competition happens. The largest block of revenue is HVAC Systems: USD 10.68 billion in 2025 at 30% of the total, 29% in 2034. Incumbency there is expensive to challenge. The line that changes hands is Building Energy Management and Controls at 12.61%, well ahead of Lighting Systems at 3.02%. The two rarely sit with the same supplier, and that is the reason a USD 35.6 billion market is not already consolidated.
Suppliers are separated by how many parts of a building they can serve under one specification and one warranty. The largest players hold broad product ranges across HVAC, controls and envelope materials, manufacturing scale, long standing relationships with developers and contractors, and the software and service capability to monitor performance after installation. Certification experience and the ability to document savings also decide large public and corporate projects. Smaller and regional suppliers compete on local installer networks, speed of delivery, specialist products such as bio-based insulation or niche controls, and price in markets where code requirements are modest.
Presence matters unevenly by region. With 32% of 2025 revenue in Asia Pacific and 28% in Europe, a supplier's coverage of those two decides most of its addressable base before any product question arises.
Per-company profiles, financials, share and development history are in the full report and not here.
List of Key Energy Efficient Buildings Market Companies Profiled
32 companies profiled. Company profiles, including financials, product portfolios and recent developments, are part of the full report.
- Johnson Controls International plc(Ireland)
- Siemens AG(Germany)
- Schneider Electric SE(France)
- Honeywell International Inc.(United States)
- Carrier Global Corporation(United States)
- Daikin Industries, Ltd.(Japan)
- Trane Technologies plc(Ireland)
- Saint-Gobain S.A.(France)
- Kingspan Group plc(Ireland)
- Rockwool A/S(Denmark)
- Owens Corning(United States)
- Signify N.V.(Netherlands)
- ABB Ltd.(Switzerland)
- Lennox International Inc.(United States)
- Mitsubishi Electric Corporation(Japan)
- Cree LED (Penguin Group)(United States)
- Acuity Brands, Inc.(United States)
- Legrand S.A.(France)
- Assa Abloy AB(Sweden)
- Andersen Corporation(United States)
- Pilkington (NSG Group)(Japan)
- AGC Inc.(Japan)
- Dow Inc.(United States)
- BASF SE(Germany)
- Covestro AG(Germany)
- Huntsman Corporation(United States)
- Knauf Gips KG(Germany)
- Paroc Group Oy(Finland)
- Fletcher Building Limited(New Zealand)
- Azbil Corporation(Japan)
- Bosch Thermotechnology (Robert Bosch GmbH)(Germany)
- Viessmann Climate Solutions SE(Germany)
Geographic Coverage
Every market below is broken out separately in the report.
North America
3Europe
8Asia Pacific
12Latin America
3Middle East and Africa
4Key Insights
Report Scope
Study parameters & segmentationThis study covers market size and forecasts over the 2020–2034 period, segmentation across 9 axes (Component, Building Type, Construction Type, Technology, Insulation Material, Certification and Rating Standard, Building Performance Level, Delivery Model, Distribution Channel), regional analysis for 5 regions and their constituent countries, a competitive landscape profiling 32 key companies, and the research methodology behind every estimate.
Segmentation
9 axes + regionQuestions This Report Answers
6 questionsWhat is the market size and growth rate, globally and by region?
How is the market segmented, and which segments lead?
Which regions and countries are covered, and how do they compare?
What are the key drivers, restraints, opportunities and challenges?
Who are the leading companies operating in this market?
What trends are expected to shape the market through the forecast period?
Frequently Asked Questions
01What is the Energy Efficient Buildings Market projected to reach?
USD 72.8 Billion by 2034, CAGR 8.33%
02What years does this report cover?
Study period 2020–2034, base year 2025, historical data 2020-2024, forecast period 2026-2034.
03Which regions are covered?
North America, Europe, Asia Pacific, Latin America, Middle East and Africa.
04Which region accounted for the largest market share?
Asia Pacific leads with 32% of global revenue through 2034.
05Which segment leads the market?
HVAC Systems is the largest line by component, at 30% of revenue in 2025.
06Who are the key companies profiled?
Johnson Controls International plc, Siemens AG, Schneider Electric SE, Honeywell International Inc., Carrier Global Corporation, Daikin Industries, Ltd., Trane Technologies plc, Saint-Gobain S.A., Kingspan Group plc, Rockwool A/S, Owens Corning, Signify N.V., ABB Ltd., Lennox International Inc., Mitsubishi Electric Corporation, Cree LED (Penguin Group), Acuity Brands, Inc., Legrand S.A., Assa Abloy AB, Andersen Corporation, Pilkington (NSG Group), AGC Inc., Dow Inc., BASF SE, Covestro AG, Huntsman Corporation, Knauf Gips KG, Paroc Group Oy, Fletcher Building Limited, Azbil Corporation, Bosch Thermotechnology (Robert Bosch GmbH), Viessmann Climate Solutions SE. Full profiles are part of the paid report.
07Can the segmentation be customized?
Yes. Custom data cuts by geography, segment, or competitor set are available on request.
Why choose CDI
Need this report shaped around your question?
The scope isn't fixed. Tell us what your team needs that the standard edition doesn't cover, and an analyst will come back on what can be adjusted and how long it takes, before you commit to anything.
Most licences include 30–60 hours of customization at no extra cost. See what each licence includes
Additional Companies
Add competitors, suppliers or the peer set you benchmark against to the companies already covered.
Deeper Competitive View
Sharpen the landscape work around your own position: product line, channel, or a named shortlist of rivals.
Extra Segment Splits
Break the market down along an axis the standard scope doesn't cut it by, or go a level deeper inside one.
Application Focus
Narrow the analysis to the specific use cases and end users your team actually sells into.
Different Time Frame
Move the base year, or widen the historical and forecast windows the study is built on.
Country-Level Detail
Go below region level into the individual countries that matter to you, rather than the standard geography split.